New tool New in the Toolbox: Look Up a Carrier, free FMCSA lookupNew tool: Look Up a Carrier Try it free
Roll legal

Slide Calculator

Enter your steer, drive and trailer axle weights from the scale. See your gross, how each axle sits against its limit, and an estimate of how many holes to slide.

Powered by

Use the three weights from your scale ticket. Limits used: 12,000 steer, 34,000 drive, 34,000 trailer, 80,000 gross.

Enter all three axle weights to check your limits.

Estimate only. About 250 lb moves between the drive and trailer axles per hole, and your trailer and tandem spacing change the real number. Slide, then scale again to confirm. Bridge and state limits can differ.

How to weigh

Good numbers start with a good weigh. Park the axles on the wrong platforms and the ticket is wrong before the math starts. The platform numbers match the three boxes above: 1 is your steer, 2 is your drives, 3 is your trailer.

Standard trailer

Diagram: a semi truck on a three platform scale, steer axle on platform 1, drive axles on platform 2, trailer axles on platform 3

Roll on slow and stop with your steer axle on platform 1, your drives on platform 2, and your trailer tandems on platform 3. The whole rig sits on the scale at once. Set the brake, stay in the cab, and let the weighmaster take it from there.

Spread axle

Position 1

Diagram: a spread axle trailer in position 1, steer axle on platform 1, drive axles on platform 2, both trailer axles on platform 3

Position 2 · Pull forward

Diagram: a spread axle trailer in position 2, pulled forward with the steer axle off the front of the scale, drive axles on platform 1, front trailer axle on platform 2, rear trailer axle on platform 3

A spread weighs in two stops. The first stop is the same as a standard trailer: steer on platform 1, drives on platform 2. Then the weighmaster waves you forward. Pull ahead until your front trailer axle sits on platform 2 and your rear trailer axle sits on platform 3, and they weigh the trailer axles on their own.

Never slide your tandems while you are sitting on the scale. Slide after you roll off, then weigh again.

Bring the three numbers on the ticket back here and run them before you roll.

Got an overweight citation, or worried about one? What it does to your driver score is an FMCSA question, not a scale question. Find your state’s FMCSA field office.

For drivers setting tandems at the scale.

Enter your axle weights and see the slide that puts you legal, hole by hole, before you pay for a reweigh.

Know a driver who needs to check axle weights? Pass it on.

To share this tool, tap your browser’s Share button and send it to a friend.To share this tool, copy the link from your address bar and send it to a friend.

Something not working with this tool? Tell us

Estimates and suggestions for planning and support only, not official determinations. We are not responsible for outcomes based on these results.

Get the latest driver tools.

Hear it first — get notified when a new free tool drops, straight to your inbox.

No spam. Unsubscribe anytime.